BLOG

About the experience of drawing PCB package

It's not easy to think about packaging well:

Some Suggestions on PCB Design for Serpentine Lines

1. Try to increase the distance (S) between parallel lines, at least greater than 3H, and H refers to the distance the signal is routed to the reference plane. The popular saying is to walk around the big bend. As long as S is big enough, it can almost completely avoid the mutual coupling effect.

About circuit division in Protel

Protel99's electrical layer is divided into two types, open a PCB design document press, shortcut L, there is a layer settings window. The SIGNAL LAYER on the left is a positive layer, including TOP LAYER, BOTTOM LAYER, and MIDLAYER, and the middle one (INTERNAL PLANES) is a negative layer, ie INTERNAL LAYER. Both layers have completely different properties and methods of use.

How to Solve Signal Integrity Problems in PCB Design and Layout

To solve signal integrity problems, it is best to have multiple tools to analyze system performance. If there is an A/D converter in the signal path, then when evaluating the circuit performance, it is easy to find three basic problems: all three methods evaluate the conversion process, as well as the conversion process and PCB layout and other parts of the circuit. Interaction. Three areas of concern relate to the use of frequency domain analysis, time domain analysis, and DC analysis techniques. This article will explore how to use these tools to determine the root cause of issues related to PCB layout and layout. We will study how to decide what to look for; where to find it; how to test the problem through testing; and how to solve problems found.

Some basic concepts of PCB design

The concepts of Layer, Via, Overlay, Pad, Mask, etc.,

How to design anti-interference circuit

This article analyzes the causes of various interference through several typical examples. It also introduces some special rules in the design of PCB and the requirements of anti-jamming design.

MOEMS packaging technology

MOEMS packaging technology can be divided into several major aspects of die fixing, housing, wiring and optical interconnection. In MOEMS, commercial devices require a practical MOEMS hybrid reliable and safety shielded package. Due to the non-contact and non-insertion of optics, the packaging of PCB design MOEMS devices is much easier than the packaging of MEMS devices, and MEMS designs can be utilized, but excellent and reliable light alignment is required.

MOEMS packaging requirements

MOEMS packaging requirements are: resistance to mechanical and thermal shock, vibration and chemical resistance, and long life. Including wafer and wafer adhesion thickness, wafer cutting, die attach chip mounting process, thermal control, stress isolation, hermetic packaging, inspection and adjustment.

PCB Design MOEMS Technology and Packaging

The Micro-Electro-Mechanical System (MOEMS) is an emerging technology that has recently become one of the hottest technologies in the world. MOEMS is a micro-electro-mechanical system (MEMS) that uses an optical subsystem. It contains micro-mechanical light modulators, micro-mechanical optical switches, ICs, and other components, and utilizes the miniaturization, multiplicity, and microelectronics of MEMS technology. Seamless integration of optical devices and electrical devices. Simply put, MOEMS is a further integration of system-level chips. Compared with large-scale opto-mechanical devices, PCB design MOEMS devices are smaller, lighter, and faster (having a higher resonant frequency) and can use mass production techniques. Compared with the waveguide mode, this free space mode has the advantages of lower coupling loss and smaller crosstalk. The changes in photonics and information technology directly promote the development of MOEMS. Figure 1 shows the relationship between microelectronics, micromechanics, optoelectronics, fiber optics, MEMS and MOEMS. Nowadays, information technology is rapidly developing and constantly updated. By 2010, the speed of light can reach Tb/s. The ever-increasing data rate and the demand for higher-performance next-generation devices have driven the demand for MOEMS and optical interconnects, and the application of PCB design MOEMS devices in the field of optoelectronics continues to grow.

How to Combined Shipments of Orders

Thermal Design of PCB Surface Mount Power Devices

Describes how it works when using only copper PCBs from a printed circuit board as a heat sink. First understand the circuit requirements.

Common Problems in PCB Circuit Layout Design

8 Q&A in PCB Circuit Layout Design

Multi-substrate mechanical design performance requirements

The mechanical design includes selecting the appropriate board size, board thickness, board stacking, inner copper barrel, aspect ratio, and the like.

Multi-substrate electrical design performance requirements

Most of the design performance of multi-substrate is similar to that of single-substrate or dual-substrate, that is, care should be taken not to fill too many circuits with too small space, resulting in unrealistic tolerances, high inner layer capacity, and possibly even endangering product quality. Security. Therefore, the performance specification should take into account the complete evaluation of thermal shock, insulation resistance, solder resistance, etc. of the inner-layer circuit. The following describes the important factors that should be considered in multi-substrate design.

Routing skills and misunderstandings in PCB differential signal design

The application of differential signal in high-speed circuit design is more and more extensive. The most critical signal in the circuit always uses differential structure design. What other way is it so popular? How can we ensure good performance in PCB design? With these two questions, we will discuss the next section. What is a differential signal? In layman's terms, the driver sends two equal-valued, inverted signals. The receiver determines whether the logic state is "0" or "1" by comparing the difference between these two voltages. The pair of traces carrying the differential signal is called differential trace.

PCB right angle routing skills

Layout is one of the most basic job skills for PCB design engineers. The quality of the traces will directly affect the performance of the entire system. Most of the high-speed design theories will eventually be implemented and verified through Layout. It can be seen that wiring is critical in high-speed PCB design. The following will analyze the rationality of some situations that may be encountered in actual wiring, and give some comparatively optimized routing strategies. Mainly from the right-angle routing to elaborate.

PCB power line and ground processing technology

In the PCB board layout, the power line and the ground wire are very important. The noise interference generated by the power line and the ground wire should be minimized to ensure the quality of the product.

5 Keys to LED Drive Design

To popularize LED lamps, it is necessary not only to significantly reduce costs but also to solve technical problems. How to solve the problems of energy efficiency and reliability, Doug Bailey, vice president of marketing for Power Integrations, shared the experience of efficient and reliable LED driver design.

Eight Mistakes in PCB Design

1: This board's PCB design requirements are not high, use finer lines, automatically cloth it.

Reasonable Arrangement of Components in PCB Design

First, the appearance should not only consider the neat and orderly placement of components, but also consider the beautiful and smooth lines.